Mixed Profile Solid & Foam Silicone Strip Set

Stock profiles of this type are held in inventory and can ship immediately. Custom extrusions of Mixed Profile Solid & Foam Silicone Strip Set take 2-4 weeks, including tooling and production. Expedited service is available if you need the parts sooner.

Yes. We can send prototype samples or run a small trial batch of Mixed Profile Solid & Foam Silicone Strip Set so you can test fit, compression set and performance before committing to a production order. Sample policy and freight terms are confirmed together with your quotation.

Yes. We build our own extrusion dies and tooling in-house, which shortens lead times for custom mixed profile solid & foam silicone strip set and keeps dimensional accuracy and batch-to-batch repeatability under tighter control.

Closed cell if the job is keeping air, dust or water out - the cells are sealed from each other. Open cell if you need cushioning, ventilation or drainage. They are not substitutes for one another, so decide on the function before the size.

Only where there is no real pressure differential. Sponge is a gap filler and a buffer, not a pressure seal - across a pressurised joint a solid profile is the right choice. Send us what the joint has to hold back and we will tell you which one it needs.

Any sponge will lose some rebound if it is held compressed, and heat and compression both accelerate it. The practical fix is in the design: leave headroom so the seal is not compressed down to solid. Temperature and compression together drive how long it springs back.